Sabideh
One of the most common surface finishes on black granite is polished. This finish is obtained by wearing the surface of the stone step by step with special abrasives until it reaches a completely polished and shiny surface. The highest amount of surface smoothness, the most shine, mirror appearance and light reflection have given this surface a special polish that the use of this stone makes it very pleasant for the surface of counters and the exterior of buildings. Polishing the surfaces of the stones makes the colors richer and more saturated and gives a darker appearance. The most common use of this finish is on the stairs, floors and facades of buildings, and it is better in places where it is possible to get wet and slippery. There is less to be used.
Color Sabida
If designers want to use darker surfaces in granite stone, the use of special black color and thermal stabilization of the color in the oven in several stages leads to the penetration of the color in the depth of the stone and gives a darker appearance to the stone and places that increase the contrast. It needs to be used. These surfaces, next to bright materials, or combined with bright colors create an original composition.
Film
In film polishing, a part of the stone surface is disintegrated by the heat from the concentrated fire, this process causes roughness on the surface of the stone, which is called film polishing, which in addition to beauty, Due to its uneven surface, it has various uses. One of the characteristics of granite is its high filmability compared to other stones.
Leather Film
Getting close to the natural effects of stone surfaces, whether with aesthetic motives or practical purposes, has always been of interest to designers. The natural surfaces of the stones are rougher, rougher and have a coarser texture due to natural weathering. One of the methods of obtaining rough surface finishes is flaming. In order to soften part of this roughness created in the process of flaming, leathering the surface of the stone is suggested. Due to the proper friction of these surfaces, it is a suitable option for flooring, stairs in outdoor environments, next to swimming pools, sidewalks, washroom floors and bathrooms, parking lot floors, and of course, due to the attractive texture and color, they are also used in the facade of buildings.
Hond
Hond is another type of stone processing methods that the surface of the stone is polished, but with a special method that is processed, the surface of the stone becomes matte and gives it a special beauty. Hond finishing makes the surface of the stone smooth and soft. without leaving a visible scratch on it. This type of finishing is mostly used for decorative purposes.
Bush Hammer
One of the brightest surface finishes of black granite is the Bushhammer finish, which is actually a light gray color. This finish is created by rotating contact and special and very hard sharp tools inside the SAAB machine and gives a needle-like structure (surface pores) to the surface of the stone. This surface has more friction than other finishes, and for this reason, it is considered a very suitable option for floors in wet and slippery environments.
Cut
Cut polishing is a process in which the stone plate is cut from different and desired angles by tools, parallel and shallow cuts. This payment can be used in decorative spaces.
Cut
One of the most beautiful types of stone processing methods is broken cut finishing, the method of creating broken cut finish is similar to cut finish, but in the following process, the cut ridges are broken, which gives a different and beautiful look to the stone.
p>Cut Hammer
To achieve this payment, grooves must first be created on the surface of the stone. In order to reach the cut finish, these grooves have different depths and distances, which are created according to the customer's request according to the intended use of the designer of these grooves. which enables another kind of payment, one of which is the hammer cut payment, which after cutting the stone with the bits of the bush hammer (which by the way have a different and attractive shape), we reach a different level of the hammer cut.
Screch
Another non-polished finish is the creation of small, shallow, parallel and uniform grooves, which when applied to black granite stone creates a gray color and the surface of the stone has a relatively rough texture. If these stones are installed in a basic way, the bond between the stones is not seen and the worked surface is seen as a whole. The strong ability of gray color in combination with other colors leaves the designer's hand free to choose a wide range of creative designs.
Sandblab
One of the finishes in which the output stone has a very beautiful appearance is sandblasting. In this finish, the surface of the stone is changed by the sandblast machine and it takes on a texture similar to film finish.
Colored leather flame
Since the leather film finish, with all its advantages, may not satisfy some designers - who are looking for darker colors and creating a more contrasting atmosphere - with the color of the stone neck, filmed with special epoxy paint in 3 steps and carrying out the stabilization process Heat in the furnace after each step and finally removing the paint left on the surface, you can finish the colored leather film (epoxy). In this process, despite the impenetrability of Soran black granite, the color penetrates into the stone texture as much as possible so that it has a longer life and durability and is not destroyed by external factors (such as contact with detergents and solvents, climatic conditions and wear). . The use of this stone in interior environments and stairs is very popular, and due to the extraordinary ability of black color in combination with materials of other colors, it expands the possibility of diversification in selected designs.
Color Sabida
If designers want to use darker surfaces in sanded black granite, using special black epoxy paint and performing thermal stabilization in the furnace in several stages leads to depth penetration to the surface of the stone, which gives a darker appearance to the stone and makes it It makes it suitable for use in places where contrast is needed. These surfaces, next to bright materials, or combined with bright colors create an original composition.
Cut Flem
Another type of stone processing methods is polishing, which creates parallel grooves on the surface of the polished stone while maintaining the natural nature of the stone. The depth, width and distance of these grooves can be changed according to the customer's request. Due to the fact that both the filming process and the grooving process have been implemented on it, this coating is one of the most frictional coatings and is a very suitable option for the sloping surfaces of the parking lot. host Of course, the use of this payment in the facades of buildings is also very common.
Cut Sabida
One of the ways to improve and enhance the visual effect of granite stone is to create parallel grooves on sanded stone, which is known as sanded cut finish. In this method, the intervals, depth and width of the grooves can be changed according to the customer's order. It is possible to create grooves along the length of the stone plaques as well as diagonally.